Fluke 88V/A Automotive Meter Combo Kit

The Fluke 88V/A Automotive Meter Combo Kit is a complete automotive diagnostic package with virtually everything you need in an automotive multimeter.

Modern cars have more and more electrical systems. This will only increase further with the introduction of hybrid vehicles. For this, perhaps the most important tool you'll use in troubleshooting is the multimeter. The Fluke 88V has improved measurement functions, trouble-shooting features and accuracy to solve more problems on conventional as well as new hybrid vehicles.

The Fluke 80 V is independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

• Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Conductance for coil testing
• Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
• Peak min/max to capture intermittent events as short as 250 microseconds
• Large digit display with bright, two-level backlight makes the Fluke 88V significantly easier to read than the old Fluke 88
• 0.1 % dc accuracy
• 20.000 counts (4-1/2 digit) high resolution mode for precise measurements
• Measure up to 1000 V ac and dc
• Current measurements up to 10 A, 20 A for up to 30 seconds
• Built-in thermometer lets you carry one less tool (temperature probe included)
• Diode test for alternator testing
• Frequency to 200 kHz and % duty cycle
• Resistance, continuity
• RPM measurements with inductive pickup (included)
• Millisecond pulse width measurements for fuel injectors
• Magnetic hanger to attach meter to the vehicle and free your hands for other tasks
• Min/Max-Average recording with Min/Max Alert to capture variations automatically
• Peak capture to record transients as fast as 250 µs
• Relative mode to remove test lead resistance from low ohms measurements
• Auto and manual ranging for maximum flexibility
• AutoHOLD to capture stable readings avoiding noisy signals
• Large display digits and two-level bright white backlight for increased visibility
• Analog bargraph to track changing or unstable signals
• Input Alert provides audible warning against wrong use of input jacks
• Improved sleep mode draws less current for longer battery life
• Access door for fast battery changes without opening up the case
• "Classic" design with new removable holster with built in test lead and probe storage
• 10 mega-ohm input impedance won't load circuits, and is safe for computers
• Lifetime warranty

What's Included:-

• Fluke 88V Automotive Meter
• User's Manual + Quick Reference Guide
• H80M Holster with TPAK Meter Hanging Solution
• TL224 SureGrip™ Silicone Test Lead Set
• TP220 SureGrip™ Test Probe Set
• AC285 SureGrip™ Large Jaw Alligator Clip Set
• 80BK Integrated Temperature Probe
• RPM80 Inductive Pickup Probe
• Two Automotive Back Probe Pins
• Insulation Piercing Clip
• C800 Hard Case