Clare B433R Stand Alone Earth Ground Bond Tester

The Clare B433R Stand Alone Earth Ground Bond Tester is a cost effective simple to use, rugged, earth / ground bond test systemsuited to manufacturing or laboratory environments. This earth / ground bond tester can deliver a test current of 25A through a resistance/impedance of 0.1½ from a low voltage a.c. source. This earth/ ground bond tester meets the general requirements of the majority of international test standards that relate to system earth continuity or ground bonding measurement.

• Simple clear logical user interface
• Test current of 25A a.c. into a 0.1Ω impedance
• Earth continuity/ground bond impedance is displayed via a meter ranged from 0 to 1Ω, with colour coded bands for 0 to 0.1Ω (green), 0.1Ω to 0.5Ω (yellow) and 0.5Ω to 1Ω (red) to simplify operator use when correlating result to most international test standards pass fail criteria
• Supplied with high quality Clare trademark No-Burn high current earth/ground bond probe – prevents visual burn marks to product during application of the test current
• Built in test pass/fail threshold is indicated by green LED which is integral to the No-Burn test probe, and illuminates during test application – this facilitates remote working when the operator is out of sight of the test instrument, for example behind a large product under test
• Rugged design suitable for industrial use

Data Sheet :